Seintek HomePage HomePage for Korean Version HomePage for English Version
Shopping Mall for Korean Version English NEW Version
Model : Seintek G5100 Programmable Function Generator
Waveform:
15MHz Sine, Square Wave
100KHz Triangle and Ramp Wave
Mode: CW, BURST, SWEEP, TRIG
Frequency Range: 1Hz~15MHz
Resolution: 4 Digits
DC Offset: -7.5V ~ +7.5 V
Stability: Direct digital synthesis for excellent stability.
Setup: Setting and functions may be selected and stored in memory from
            the front panel.  Eight setups may be stored in memory.
Equipment: Displays information about your instrument including the Model
                     number, serial number, Calibration date, GP-IB address
                     and Firmware revision.
Remote Control: Function and ranges may be controlled from a PC via
                             the RS232 or the optional GP-IB interface.
Display: 128 by 64 pixel Super Twisted LCD display
Power Source: May be used with any line voltages from
                  85V to 270Vac (±10%, 48 to 66Hz) without any internal changes.

The G5100 is a general purpose yet high-performance instrument capable of generating standard waveform patterns at frequencies.  High performance and low cost function generator with synthesized frequency accuracy.  It is designed by a high-tech team, using the most advanced waveform synthesis techniques to generate a pure low distortion and clean output.  This instrument combines the bench-top and system features which provides a versatile solution for your testing requirements now and in the future.

Inquiry     Send Catalog
  Specification
  Frequency   Range   1Hz ~ 15MHz
  Resolution   4 digits
  Accuracy   ±(Setting value x 0.5% + 1 digit)
  Wave Form Characteristics

Sine

   Frequency Range   1Hz ~ 15MHz
  Amplitude   Max. 10Vpp (Impedance 50Ω)
  Harmonic Distortion   < 1.5%(10Hz to 100Hz)

Triangle

   Frequency Range   1Hz ~ 100kHz
  Linearity   Better than 1%

Square

   Frequency Range   1Hz ~ 15MHz
  Rise/Fall time   < 35nS
  Symmetry   20% ~ 80%

Pulse

   Frequency Range  1Hz ~ 15MHz
  Rise/Fall time   < 35nS
  Duty Cycle   100nS to 10S

Ramp

   Frequency Range   1Hz ~ 100kHz
  Linearity   1% (1Hz~100kHz)
  Output Characteristics
    Waveforms   Sine, Triangle, Square, Pulse, Ramp
  Output Range   Max. 10Vpp (Impedance 50Ω), Max. 20Vpp (Impedance ∞Ω)
  Impedance   50Ω ± 5%
  Attenuator   0, 20 dB
  DC Offset   -7.5 ~ + 7.5V (No Load)
  SWEEP Characteristics
    SWEEP period   9.95S ~ 0.05S
  SWEEP range   1 : 1 to 10 : 1
  External  SWEEP   To be controlled by the VCF input
  VCF Input
    Input voltage   ±5V DC, maximum sweep occurs at 5VDC
  Accuracy   1%
  Input Impedance   Approximately 1kΩ
  TTL output
    Level (TTL)   Fixed amplitude, < 0.4V: for a low "L", and g> than 2.4V: for a high "H"
  Rise and Fall time   < 35nS
  FUNC output
    Level (TTL)   Variable Amplitude (Max. 10Vpp, Impedance 50Ω)

　

Copyright ⓒ 1999~2002 Sein Electronics Co., Ltd. All rights reserved.

Issued Date: Oct. 01, 1999

E-mail : seintek@seintek.com

Last modified: Nov. 27, 2002

The contents of this page may not be reproduced/published anywhere else without the written
permission of the Sein Electronics Co., Ltd.